Rubber Tile
DivisionDivision 09 Finishes
Section09 60 00 Flooring
ApplicationsPublic Realm & Landscape
PRODUCT

Rubber Tiles & Resilient Surfacing

Playground · Sports · Equestrian · Acoustic — resilient and shock absorbing

Sports & Landscape EPDM Shock Absorbing
Overview

Resilient rubber surfacing for projects needing cushioning, abrasion resistance, noise control and impact attenuation — EPDM playground systems with shock pads, municipal and landscape walkways, equestrian surfaces for arenas, paddocks and stables, sports and outdoor training areas, and acoustic or vibration isolation layers.

Specification

Resilient rubber surfacing is supplied from 7 mm wall padding through 15–30 mm interlocking floor mats to 25–50 mm paving bricks, plus 13 mm seamless poured thermoplastic elastomer. Standard formats run from 200×100 mm and 200×160 mm bricks through 305×305 mm and 600×600 mm tiles to 1000×1000 mm slabs. Laboratory values include 5 kN/m tear strength, 47 % rebound resilience and impact absorption of 40 % to 50 %, with coloured compounds produced by a low-emission manufacturing route.

Wet slip resistance exceeds 43 BPN on the pendulum tester and light fastness exceeds grade 4 for coloured compounds. Acoustic wall linings deliver at least 20 dB impact-sound improvement with a measured impact sound pressure level of 53 dB, and compression creep stays at 0.5 % or less under sustained load. Interlocking wash-bay tiles carry loads up to 120 kN with a friction coefficient below 0.4 μ, and the compounds resist embrittlement down to −20 °C.

Standards
  • EN 13036-4 — Pendulum test method for measuring wet slip resistance expressed in BPN.
  • ISO 34-1 — Determination of tear strength for rubber and thermoplastic elastomer compounds.
  • ISO 4662 — Determination of rebound resilience of vulcanised rubber by pendulum rebound.
  • EN ISO 717-2 — Rating of impact sound insulation for floor coverings and separating slabs.
  • EN 14041 — Essential characteristics for resilient, textile and laminate floor coverings.
  • EN 13501-1 — Reaction-to-fire classification for resilient floor and wall surfacing.

Critical fall height and accessibility are stated for the complete build-up — tile plus shock pad plus substrate — not for the tile in isolation.

Applications
  • Equestrian & Animal Care — stable wall padding and interlocking loose-box flooring.
  • Sports & Fitness — free-weight drop zones and gym platform surfacing.
  • Education & Childcare — impact-absorbing playground and nursery flooring.
  • Healthcare & Senior Living — slip-resistant circulation floors in care corridors.
  • Landscape & Public Realm — municipal paving bricks, tree surrounds and kerb units.
  • Transport & Infrastructure — walkway and wash-bay surfacing in vehicle depots.
  • Industrial & Warehousing — anti-fatigue and impact-absorbing floors in workshops.
  • Retail & Hospitality — acoustic and slip-resistant floors in back-of-house areas.
Certificates & documentation
  • Third-party laboratory test reports for tear strength, rebound and impact absorption
  • Pendulum slip-resistance test report to EN 13036-4
  • Impact sound improvement test report to EN ISO 717-2
  • EN 13501-1 reaction-to-fire classification report for floor coverings
  • Antibacterial efficacy test report for the hygienic surface coating
  • ISO 9001 and ISO 14001 management system certificates
Supply capability
  • Tiles, shock pads, adhesives and accessories supplied as one system.
  • Build-up selection against critical fall height, accessibility and acoustic requirements.
  • Export packing, FOB / CFR / CIF to Gulf ports.
Approval

Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.

FREQUENT QUESTIONS

Rubber Tiles & Resilient Surfacing — Buyer Questions

What applications are covered?

EPDM playground surfacing over shock pads, outdoor sports and training areas, equestrian arena and stable flooring, municipal walkways and landscape paving, shooting range protection, and acoustic or vibration isolation beneath plant. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.

Which standards and certifications apply?

Playground surfaces are tested to EN 1177 or ASTM F1292 for critical fall height, with EN 71-3 migration testing, EN 14041 for resilient floor coverings, EN 13501-1 for reaction to fire, and ASTM F1951 for accessibility. Also specified and procured as Rubber Flooring, EPDM Surfacing and Playground Surfacing; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.

How is critical fall height determined?

Critical fall height is stated for the complete build-up — tile plus shock pad plus substrate — not for the tile in isolation, and is tested to EN 1177 or ASTM F1292. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.

Are equestrian surfaces available?

Yes. Arena surface tiles, paddock and stable mats and horse walkways are supplied with hoof-impact attenuation and shock absorption suited to equestrian use. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.