Site Furniture & Street Furniture
Outdoor site furniture for campuses, transport hubs and public facility areas, supplied as a coordinated package — bicycle racks and lockers, litter and recycling receptacles including smart bins, manufactured planters, and site seating and tables. Manufactured in GRC, UHPC and custom materials, often combined with steel components, so a site keeps one material language and can be maintained and upgraded as a system.
Street furniture is fabricated from S235JR to S355 carbon steel, AISI 304 or 316L stainless steel, 6063-T6 aluminium extrusion or recycled HDPE slats. Corrosion protection is a duplex system: hot-dip galvanizing to 70-100 micron per EN ISO 1461, followed by a 60-120 micron polyester powder coating qualified to AAMA 2604 or AAMA 2605 and to EN 13438 for coatings over zinc. Cross-cut adhesion is verified to ISO 2409 Class 0 and neutral salt-spray resistance to 1000 h per ISO 9227, targeting ISO 12944-6 corrosivity class C5-M for GCC coastal atmospheres.
Dimensions follow accessibility guidance: bench seat height 430-485 mm, seat depth 400-600 mm and backrest height 450-600 mm; bike racks 760-900 mm high with 50-76 mm Schedule 40 tube and two-point bicycle support; bollards 900-1200 mm above grade in 114-324 mm diameter. Contract-use seating is tested to a 2000 N seat static load and 100,000-cycle fatigue regime, tree grates and access covers carry EN 124 load classes A15 to D400, and vehicle separation bollards can be specified with a rated impact performance to IWA 14-1 or ASTM F2656.
- EN 581-1:2017 — General safety requirements for outdoor seating and tables for contract use - edge and corner radii, finger-entrapment probes of 7 mm and 12 mm, and shear and crush point control.
- ADA Standards for Accessible Design (2010) / ANSI A117.1 — Accessibility geometry for street furniture: 430-485 mm seat height, protrusion limits of 27 in to 80 in above the walking surface, and a 760 x 1220 mm clear floor space beside fixed seating.
- EN ISO 1461 — Hot-dip galvanized coatings on fabricated iron and steel articles, requiring 70-100 micron local coating thickness for site furniture exposed to coastal and industrial atmospheres.
- AAMA 2604 / AAMA 2605 (with EN 13438, QUALICOAT) — Voluntary specification and test methods for high-performance organic powder coatings on aluminium and galvanised steel, covering gloss retention, chalk resistance and 5-year or 10-year Florida exposure.
- EN 13071-1 — Requirements for static waste containers of up to 5000 L capacity that are top-lifted and bottom-emptied, covering litter bin capacity, stability, lifting geometry and emptying safety.
- EN 124-1 / EN 124-2 — Load-bearing classes A15, B125, C250 and D400 for gratings, tree pit covers, gully tops and access covers installed in pedestrian, kerbside and carriageway zones.
- PCI MNL-130 — Manual for quality control for plants and production of glass-fibre reinforced concrete products, applied to GRC bench shells, planters and bin surrounds.
- PCI MNL-117 — Manual for quality control for plants and production of architectural precast concrete products, applied to UHPC furniture elements.
- PCI MNL-135 — Tolerance manual for precast and prestressed concrete construction, governing cast and erected tolerances of precast furniture units.
Loading, stability, anchorage and user safety requirements follow the project specification, with wind uplift and fixings checked for the site exposure.
- Streetscapes & boulevards — benches, bollards and litter bins along urban streets and promenades.
- Parks & plazas — seating, tree grates and planters in public parks, plazas and pocket gardens.
- Transit interchanges — bus, tram and metro interchange forecourts with high daily footfall.
- Coastal & waterfront — boardwalks, marinas and beachfront developments needing C5-M corrosion protection.
- Retail & mixed-use — courtyard and waterfront seating for retail and mixed-use destinations.
- Education & healthcare — campus seating, bike racks and shelters at universities, schools and hospitals.
- Corporate & business parks — headquarters and business park courtyards with contract-use load requirements.
- Stadia & events — stadium, exhibition and event venue concourses handling peak crowd loads.
- Airports & free zones — landside forecourts and free-zone staff areas.
- ISO 9001 / ISO 14001 / ISO 45001 management system certificates
- EN 10204 Type 3.1 material certificates for steel, stainless steel and aluminium extrusion
- Coating inspection report: dry film thickness, ISO 2409 cross-cut adhesion and ISO 9227 salt-spray duration
- Static load, fatigue and stability test reports for contract-use seating (2000 N static, 100,000 cycles)
- Reaction-to-fire classification to EN 13501-1 (A2-s1, d0 for metal; B-s1 for timber and composite slats)
- FSC or PEFC chain-of-custody certificate for hardwood and recycled-content declaration for composite slats
- Coordinated packages in consistent materials and finishes across the site.
- Custom shape, colour and surface finish per project, including smart configurations.
- Export packing, FOB / CFR / CIF to Gulf ports.
Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.
Site Furniture & Street Furniture — Buyer Questions
What items are included?
Bicycle racks and lockers, litter and recycling receptacles including smart bins, manufactured planters, and site seating and tables, supplied as a coordinated package. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.
What materials are used?
GRC, UHPC and custom materials, often combined with steel components where strength or fixing demands it. Shape, colour and surface finish are customised per project. Also specified and procured as Bicycle Rack, Park Bench and Planter; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.
Can smart bins be supplied?
Yes. Smart bins can be configured with inlet recognition, fill level monitoring, compaction and weighing, and remote maintenance alerts, subject to the tender and design requirements. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.
Which standards and certifications apply?
Precast items follow BS EN 13198, steel components are CE marked to EN 1090-1, exposed finishes are corrosion tested to ISO 9227, and smart bin electronics carry IP ratings to IEC 60529. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.



