Metal Railing & Handrail
DivisionDivision 05 Metals
Section05 52 00 Metal Railings
ApplicationsBuildings & Architecture
PRODUCT

Metal Railings & Handrails

Stair · Ramp · Platform · Glass — fabricated to EN 1090 and project load requirements

Architectural Metals EN 1090 BS 6180
Overview

Railings and handrails for stairs, ramps, platforms, exposed edges and bridge pedestrian areas in public, commercial, healthcare, transport and industrial facilities. Fabricated in stainless steel, carbon steel and aluminium with optional glass infill, complete with posts, connectors and base fixings, and finished by PVD, bead blasting, painting, powder coating or anodizing. No vehicle containment performance is claimed.

Specification

Railings and handrails are fabricated from ASTM 304 and 316L stainless steel, hot-dip galvanized carbon steel or aluminium extrusions, with 316L selected for coastal, humid and high-chloride exposure. Posts and rails use round tube from 89 mm to 219 mm diameter with wall thickness from 3 mm to 15 mm. Joints are continuously welded, ground and refinished so grain and polish continuity is maintained. Finishes include hairline or satin, 8K mirror, bead-blasted, etched, PVD coloured and powder-coated surfaces.

Guards are set at 1050 to 1100 mm above finished floor level, with intermediate rails, post centres and base fixings determined by structural calculation against the specified horizontal line load, typically 0.74 kN/m for domestic use and 1.0 to 1.5 kN/m for public and assembly areas under BS 6180, with actions from EN 1991-1-1. Glass infill panels use thermally toughened or laminated safety glass to EN 12150. Welded assemblies are delivered under EN 1090-1 with plate to ASTM A240 and tube to ASTM A554.

Standards
  • ASTM A554 — Welded stainless steel mechanical tubing used for posts, top rails and infill framing.
  • ASTM A240 — Chromium and chromium-nickel stainless steel plate, sheet and strip for bases and brackets.
  • EN 1090-1 — Execution classes and conformity assessment for load-bearing steel and aluminium components.
  • BS 6180 — Code of practice for barriers in and about buildings, including height and line load levels.
  • EN 1991-1-1 — Eurocode 1 actions on structures, defining imposed horizontal loads for guards and barriers.
  • EN 12150 — Thermally toughened soda-lime silicate safety glass used in frameless and framed infill panels.

Where the project cites IBC, ADA, BS or an owner barrier standard, the railing is designed and submitted against that requirement, including the governing load case and anchorage calculation.

Applications
  • Buildings & Construction — stair flights and landing balustrades in office towers.
  • Hospitality & Retail — hotel atrium balconies and roof terrace guardrails.
  • Transportation & Infrastructure — metro station platforms and airport pier walkways.
  • Marine & Coastal — corniche promenades and marina boardwalk edges.
  • Municipal & Public Works — public park bridges and plaza level changes.
  • Healthcare & Education — hospital corridor and school circulation handrails.
  • Industrial & Manufacturing — plant walkways and mezzanine edge protection.
Certificates & documentation
  • ISO 9001 quality management system certificate
  • Mill and material certificates traceable to EN 10204 type 3.1
  • Welding procedure specifications, procedure qualification records and welder qualifications
  • Structural calculation package with stamped shop and installation drawings
  • Coating and salt-spray inspection reports to ASTM B117
  • Installation manual, maintenance guide and warranty documentation
Supply capability
  • Shop detailing, structural analysis, fabrication and installation as one package.
  • Samples and mock-ups for finish approval before production release.
  • Export packing with surface protection, FOB / CFR / CIF to Gulf ports.
Approval

Supply references in the Gulf include Sports Boulevard, NEOM, Saudi Entertainment Ventures, King Salman Park Foundation, Red Sea Global, Qatar Rail and Qatar Museums. Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.

FREQUENT QUESTIONS

Metal Railings & Handrails — Buyer Questions

Which standards and certifications do the railings comply with?

Railings are supplied to EN 1090-1 for structural steel and aluminium components, with barrier design to BS 6180 and loads to EN 1991-1-1. Where the project cites IBC, ADA or an owner barrier standard, the railing is designed and submitted against that requirement. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.

What materials and finishes are available?

Stainless steel, carbon steel and aluminium, with optional glass infill. Finishes are PVD, bead blasting, painting, powder coating and anodizing, selected to suit the substrate and the exposure condition. Also specified and procured as Stainless Steel Railing, Glass Railing and Balustrade; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.

Do railings provide vehicle containment?

No. These are pedestrian handrails and guardrails providing hand support and fall protection. Vehicle containment requires a crash-rated barrier system rated to ISO 22343-1, PAS 68, IWA 14-1 or ASTM F2656. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.

What is submitted for approval?

Shop drawings, structural analysis and anchorage calculations for the governing load case, EN 10204 3.1 material certificates, welder qualifications, method statement and O&M documentation, with samples for finish approval. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.