Public Sculpture & Environmental Art
Public art and environmental sculpture delivered end to end — public art planning, environmental art design and construction, original sculpture design and design development, fabrication, installation, restoration of existing works, and art furniture customisation. Integrated art and engineering services are also delivered for commercial real estate projects.
Sculptures are produced in ASTM 304 and 316L stainless plate, weathering steel, red copper at not less than 99.9% copper, brass H62 and tin bronze, with 316L and bronze preferred for coastal and permanently exposed sites. Shaping uses hand forging for complex organic forms, sand or investment casting for bronze, and welded plate fabrication for large geometric volumes; weathering steel is laser cut, folded and perforated for relief and screen work. Documented public works range from about 1.5 m to 3.0 m, larger monuments being engineered to project drawings.
Finishes comprise mirror polish, brushed, vibration, sandblasted, etched and PVD coatings in gold, black and rose gold, plus natural or chemical patination and protective wax or clear coats on copper. Weathering steel forms a dense oxide patina stabilising at about 0.13 mm, giving 10 to 20 years of service in coastal zones and 20 to 40 years inland; 316L stainless reaches 20 to 40 years and bronze 30 to 100 years. Wind resistance and load-bearing checks follow EN 1991-1-4, and steel fabrication is delivered under EN 1090-1.
- EN 1991-1-4 — Eurocode 1 wind actions used for wind resistance and overturning checks on tall works.
- EN 1090-1 — Execution class and conformity requirements for fabricated steel and aluminium structures.
- ASTM A240 — Stainless chromium-nickel plate, sheet and strip used for formed and welded sculpture shells.
- ASTM A588 — High-strength low-alloy structural steel with atmospheric corrosion resistance for weathering work.
- ASTM B584 — Copper alloy sand castings covering bronze and brass components for cast sculpture.
- ISO 9223 — Classification of atmospheric corrosivity used to select material grade and coating system.
Structural design, foundation interface and coating specification follow the installation site conditions and the local authority requirement for public art.
- Municipal & Public Works — city plaza landmark installations and gateway features.
- Parks & Public Realm — park art trails and waterfront promenade focal points.
- Hospitality & Retail — hotel lobby feature pieces and resort garden installations.
- Buildings & Construction — mixed-use development entrances and podium art walls.
- Transportation & Infrastructure — metro station concourses and airport terminal art.
- Culture & Heritage — museum forecourts and memorial monuments.
- Healthcare & Education — campus courtyards and university entrance features.
- ISO 9001 quality management system certificate
- Material and mill certificates traceable to EN 10204 type 3.1
- Structural calculation and wind analysis report with foundation loading data
- Shop drawings, 3D models and approved finish or patina sample panels
- Fabrication inspection records with weld and surface finish checklists
- Installation manual, lifting plan and long-term maintenance guide
- Design, design development, fabrication, installation and restoration as one service.
- Sculpture engineering — structural design and construction supervision.
- Export packing with custom crating, FOB / CFR / CIF to Gulf ports/global ports, with installation supervision.
International and domestic public sculpture and landscape installation deliverables include overseas works installed across Austria, Geneva, Malaysia, Rwanda, Tunisia, Doha and Uzbekistan, along with landmark parks, industrial parks and commercial real estate works. Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.
Public Sculpture & Environmental Art — Buyer Questions
What services are covered?
Public art planning, environmental art design and construction, original sculpture design and design development, fabrication, installation, restoration of existing works, and art furniture customisation. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.
Is engineering support included?
Yes. Sculpture structural design and construction supervision are provided, so the fabricated work meets the wind, seismic and foundation requirements of the installation site. Also specified and procured as Public Art, Art Installation and Art Furniture; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.
Which standards and certifications apply?
Structural steelwork is CE marked to EN 1090-1 and designed to EN 1991-1-4 and EN 1993-1-1, stainless components follow ASTM A240 or EN 10088, coating systems ISO 12944, and fabrication runs under ISO 9001. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.
Can existing works be restored?
Yes. Sculpture restoration and conservation are provided alongside new commissions, including condition assessment and treatment proposals. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.



