Ladder type cable tray supplied for a Middle East industrial project
DivisionDivision 26 Electrical
Section26 05 36 Cable Trays for Electrical Systems
ApplicationsIndustrial & Energy · Power · Transport · Data
PRODUCT

Cable Tray & Cable Ladder Systems

Ladder · Perforated · Solid bottom · Wire mesh · GRP — to NEMA VE 1 & IEC 61537

Industrial & Energy Facilities NEMA VE 1 IEC 61537
Overview

Cable tray and cable ladder systems for power, control and instrumentation cabling in plant, utility and building services. Supplied as ladder type, perforated trough, solid bottom, wire mesh basket and trunking, in pre-galvanized or hot-dip galvanized carbon steel, stainless steel 304/316L, aluminium and GRP, with matching bends, tees, reducers, covers and support hardware.

Specification

Cable tray and ladder systems are supplied in steel, aluminium, FRP, PVC and wire-mesh construction, covering tray, ladder, channel and mesh formats with matching angle supports, strut channels, pipe and tube clamps and fastener sets. Steelwork is hot-dip galvanized to ASTM A123/A123M with coating performance checked by neutral salt-spray exposure to ASTM B117, and stainless executions are offered in 304 and 316L. Standard widths run from 50 mm to 1200 mm with side-rail heights of 50 mm to 200 mm and material thickness from 1.0 mm to 3.0 mm.

Systems are rated and tested to IEC 61537 for European work and to NEMA VE-1 for North American work, installed to NEMA VE-2 practice, with span and load selection verified by finite-element analysis of the complete support assembly against the project load schedule. Rung spacing is set at 225 mm, 300 mm or 450 mm centres for ladder types. FRP and PVC executions are specified to UL 94 V-0 flame class for corrosive and indoor areas. Design support covers model-library take-off and drawing-led fabrication.

Standards
  • IEC 61537 — International performance standard for cable tray and cable ladder systems, covering load, deflection and safety tests.
  • NEMA VE-1 — North American standard defining metallic cable tray construction, load rating and testing requirements.
  • NEMA VE-2 — North American recommended practice for cable tray installation and field support spacing.
  • ASTM A123/A123M — Specification for hot-dip zinc coatings on fabricated steel products such as tray and ladder sections.
  • ASTM B117 — Standard practice for neutral salt-spray testing used to verify coating durability of metallic tray systems.
  • UL 94 — Flammability classification applied to FRP and PVC tray, ladder and channel components.

Where the project specification cites BS, DIN, JIS or an owner material specification, material is sourced and certified to that standard and submitted against it.

Applications
  • Oil & Gas — offshore platform cable routing racks.
  • Refineries & Petrochemical — unit cable ladder runs from substation to pump skids.
  • Industrial Plants — power and control cable distribution above production lines.
  • Data & Telecom — structured cabling tray runs above server aisles.
  • Utilities & Energy — substation and switchroom cable support framing.
  • Transport Infrastructure — tunnel and metro gallery cable containment.
  • MEP Installations — riser and ceiling-void cable management in commercial towers.
  • New Energy — solar and battery energy storage array cable runs.
Certificates & documentation
  • ISO 9001 quality management system certificate covering design and manufacture
  • ISO 14001 environmental management system certificate
  • ISO 45001 occupational health and safety management system certificate
  • North American product safety listing certificate issued to NEMA VE-1
  • IACS marine classification society type-approval certificate for offshore service
  • EN 10204 3.1 mill test certificate with load and deflection test report
Supply capability
  • Fabrication to drawings, including design optimisation for long spans and heavy cable loads.
  • Complete system supply — trays, fittings, covers, strut channel, clamps and fasteners from a single qualified source.
  • Export packing, FOB / CFR / CIF to Gulf ports/global ports, consolidated with other MEP and electrical items.
Approval

Supplied to projects for international operators including Petrobras, ExxonMobil, GE, Keppel and ST Engineering, with marine certification from ABS, DNV and BV. Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.

FREQUENT QUESTIONS

Cable Tray — Buyer Questions

Which standards and certifications do PROTEKTA cable trays comply with?

Cable tray and ladder systems are supplied to NEMA VE 1 (load classes 12A to 20C) and IEC 61537 / EN 61537, with galvanizing to ASTM A123 / ISO 1461, pre-galvanized sheet to EN 10346 and stainless steel to ASTM A240. Where the project specification cites BS, DIN, JIS or an owner material specification, material is sourced and certified to that standard. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.

What sizes, grades and materials are available?

Ladder, perforated trough, solid bottom and wire mesh basket types in widths from 50 mm to 1200 mm and material thickness from 0.8 mm to 3.0 mm, in standard lengths of 2440, 3000 and 6000 mm. Materials are pre-galvanized or hot-dip galvanized carbon steel, stainless steel 304 and 316L, aluminium and GRP. Also specified and procured as Perforated Cable Tray, Wire Mesh Cable Tray and FRP Cable Tray; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.

Can non-standard sizes be fabricated to project drawings — including custom and OEM supply?

Yes. Non-standard widths, heavier gauges for long spans and custom fittings are fabricated to the project drawings, with load performance verified against the class or span stated in the specification. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.

What documentation is provided with each shipment and delivery terms?

Certificate of conformity, packing list, EN 10204 3.1 material certificates, galvanizing thickness readings and load test reports where specified, plus the third-party inspection release when the owner appoints SGS, Bureau Veritas, Intertek or TÜV. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.