Fire Suppression Valves & Hydrants
Water-based fire suppression components — OS&Y and NRS gate valves with tamper and supervisory options, butterfly valves with tamper switch, check valves in grooved, flanged and double-door patterns, alarm and water flow devices, fire hydrants in dry and wet barrel patterns, and standpipe and dry riser valves. Supplied as a packaged scope for sprinkler, standpipe and hydrant systems under one submittal.The scope also covers grooved pipe joining systems — rigid and flexible couplings, mechanical tees and crosses, grooved elbows, tees, reducers and caps, and flange adapters — so the valve set and the mechanical joint system are submitted and listed as one package.
Resilient seated OS&Y and NRS gate valves are cast in ductile iron to ASTM A536 grade 65-45-12, with an EPDM-encapsulated wedge, an AISI 304 or AISI 316 stem and brass stem bushes and nuts. Sizes run from 2 in to 24 in, and pressure classes cover 200, 250, 300 and 363 PSI. Working temperature is 4 °C to 60 °C. Grooved ends follow AWWA C606, flanged ends follow ASME B16.1 Class 125 or ASME B16.42 Class 150, and wetted surfaces are fusion-bonded epoxy coated to ANSI/AWWA C550.
Butterfly valves are designed to MSS SP-67 with an ISO 5211 top flange, EPDM or NBR seats and grooved, wafer or lug bodies rated 175–363 PSI. Swing check valves follow AWWA C508, and dry-barrel and wet-barrel hydrants meet AWWA C502 and AWWA C503 with NFPA 1963 nozzle threads, one 4.5 in pumper nozzle and two 2.5 in hose nozzles. Supervisory and pressure switches carry 15 A at 125/250 VAC contacts and comply with NFPA 13, 13D, 13R and 72.
Grooved couplings cover 1-12 in / DN25-DN300 rigid and 3/4-24 in / DN20-DN600 flexible sizes rated 300-750 PSI / 21-52 bar on ASTM A53 / A106 carbon steel pipe. Housings are ductile iron to ASTM A536 grade 65-45-12, giving 448 MPa tensile and 310 MPa yield. Track bolts are to ASTM A449 or ISO 898-1 class 9.8 and nuts to ASTM A563 grade B, zinc plated. Gaskets are EPDM from -34 °C to +110 °C, nitrile from -29 °C to +82 °C, or halogenated butyl. Finishes are orange epoxy enamel or hot-dip galvanizing to ASTM A153.
Flexible couplings permit 0-3.2 mm pipe end separation, doubled on cut groove, plus 1° to 2°15′ angular deflection, absorbing seismic drift, settlement and thermal movement; design values are halved below DN100. Mechanical tees and crosses serve 2-8 in mains with 1/2-4 in / DN15-DN100 branches at 500 PSI / 34 bar in grooved, NPT or ISO 7-Rc outlets. Grooved fittings - 90°, 45°, 22.5° and 11.25° elbows, tees, reducers and caps - are ASTM A536 ductile iron rated 300 PSI / 21 bar, and flange adapters match ANSI Class 125 / 150 / 300, PN10 / PN16 and JIS 10K drilling.
- AWWA C515 — Standard for resilient-seated cast-iron gate valves for water and fire service.
- AWWA C606 — grooved and shouldered joints, defining roll- and cut-groove dimensions, gasket seat geometry and dimensional tolerances for steel pipe ends.
- ANSI/AWWA C550 — Protective fusion-bonded epoxy coating for the interior of valves and hydrants.
- ASTM A536 — Specification for ductile iron castings, grade 65-45-12 body and bonnet material.
- ASME B16.1 — Cast iron pipe flanges and flanged fittings, Class 125 drilling pattern.
- NFPA 13 — Installation of sprinkler systems, including valve supervision and control.
- ISO 6182-12 — grooved-end fittings and couplings for automatic fire sprinkler systems, covering pressure rating and endurance testing.
- ASTM A53 / A106 / A312 — carbon steel Grade B seamless, ERW and furnace-welded pipe, and stainless pipe grades, for which standard groove dimensions are published.
- ASME B31.1 / B31.3 / B31.9 — power, process and building services piping codes referenced for support spacing, thermal flexibility and pressure design of mechanically joined systems.
- ASTM A153 — hot-dip zinc coating on iron and steel hardware, applied to coupling housings, bolts and nuts for corrosion duty.
NSF/ANSI 61 applies to potable wetted surfaces and VdS approval is available on selected models. Where the authority having jurisdiction requires a local listing, the submittal is prepared against that requirement. Grooved joint dimensions are verified against the published roll- and cut-groove tolerances of AWWA C606, and gasket grade is selected for the fluid and temperature range.
- Oil & Gas — fire water ring mains at refineries and tank farms.
- Commercial & High-Rise — sprinkler riser control valves in towers and malls.
- Industrial & Manufacturing — deluge and foam system isolation in process plants.
- Utilities & Water — distribution feed lines and pumping station headers.
- Transport & Airports — hydrant loops and hangar sprinkler isolation valves.
- Healthcare & Education — floor control valve assemblies in hospitals and campuses.
- Warehousing & Logistics — storage sprinkler systems with supervised control valves.
- District Cooling & Power — fire pump discharge mains and cooling water headers.
- Data Centres — pre-action sprinkler loops over server hall cold aisles, UPS and battery rooms, and diesel generator room fire mains.
- HVAC & Building Services — chilled water and condenser water risers joined with flexible couplings in plant rooms.
- Marine & Offshore — bilge, ballast and fire main piping in engine rooms and on deck.
- UL listing and FM approval certificates for fire protection valves and hydrants
- NSF/ANSI 61 certification for components in potable water service
- EN 10204 3.1 material certificates for ductile iron castings and stainless-steel stems
- Hydrostatic shell and seat test certificates to the applicable AWWA valve standard
- Fusion-bonded epoxy coating inspection and holiday detection report
- Supervisory switch electrical rating and enclosure test documentation
- FM approval and UL listing certificates for grooved couplings, fittings and bolted branch outlets
- CE and UKCA declarations of conformity to EN 10311 for grooved couplings and grooved-end fittings
- Full manufacturing workflow in-house — casting, machining, coating, assembly and testing.
- Grooved couplings, fittings and valves supplied as one listed package with matched groove dimensions, gasket grade and coating specification.
- Sprinkler, standpipe and hydrant components supplied as one packaged scope with matched listings.
- Export packing, FOB / CFR / CIF to Gulf ports/global ports, consolidated with valves and pipe fittings.
Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.
Fire Suppression Valves & Hydrants — Buyer Questions
Are the valves UL listed and FM approved?
Fire valves, grooved couplings and grooved-end fittings are supplied as UL listed and FM approved, with some models holding UL/FM/VdS approval. Hydrants are supplied to AWWA C502 or C503 with NSF/ANSI 61 and UL 246 or FM 1510 where the model carries them. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.
Which standards and certifications apply to the system scope?
Sprinkler systems to NFPA 13, standpipes to NFPA 14, fire pumps to NFPA 20 and private fire mains to NFPA 24. Valve design follows MSS SP-67, SP-70 and SP-71. Grooved couplings, mechanical branch outlets and grooved-end fittings are listed to AWWA C606 and ISO 6182-12, with joints rated to ASME B31.1 / B31.3 / B31.9 and flanges to ASME B16.1 / B16.42. Also specified and procured as Fire Hydrant, Alarm Valve and Sprinkler Valve; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.
Can monitoring and tamper switches be supplied fitted?
Yes. Supervisory and tamper switches, water flow indicators, indicator posts and wall indicator posts are fitted and function-tested before shipment, so the fire alarm interface is complete on delivery. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.
What corrosion protection is used?
Fusion-bonded epoxy applied to ANSI/AWWA C550, with EPDM or NBR sealing elements. Coupling housings are orange epoxy enamel or hot-dip galvanized to ASTM A153, and gasket grade is selected for the fluid and temperature range. Dry film thickness and adhesion reports are provided with the shipment. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.



