Pipe Fittings & Flanges
Butt-weld and flanged pipe fittings for oil and gas, petrochemical, offshore, power and water networks — elbows, tees, reducers, caps, heads and flanges from 1/2" to 104". Supplied in carbon steel, alloy steel, stainless steel and duplex or super duplex, with cement mortar, FBE, polyurethane or zinc coatings and linings matched to the conveyed fluid and burial condition.
Manufactured range covers elbows in 30, 45, 60, 90 and 180 degrees in long and short radius, equal and reducing tees, concentric and eccentric reducers, caps and flanges. Sizes run from 1/2″ to 104″ in seamless and welded construction. Wall thickness covers SCH 5S to SCH 160 and up to 100 mm. Materials include carbon steel, alloy steel, austenitic and duplex stainless steel, and copper nickel and titanium grades.
Selection follows the piping class, design pressure and temperature. Heat treatment is applied as normalizing, normalizing plus tempering or solution annealing, with recorded time-temperature charts. Dimensional and thickness checks, positive material identification, tensile, low temperature impact and metallographic testing are performed in-house, together with radiographic, ultrasonic, magnetic particle and penetrant examination. Manifolds and prefabricated spools are supplied to drawing.
- ASME B16.9 — factory-made wrought buttwelding fittings.
- ASME B16.11 / B16.5 — forged fittings, socket-welding and threaded; pipe flanges and flanged fittings.
- ASTM A234 / A403 / A420 — wrought carbon steel, stainless steel and low temperature steel piping fittings.
- EN 10253-1 / -2 / -4 — butt-welding pipe fittings in carbon, alloy and stainless steel.
- ISO 3183 / API 5L — line pipe steel grades for transmission service.
- PED 2014/68/EU — pressure equipment conformity assessment for European projects.
- BS EN 545 / BS EN 598 — ductile iron pipes, fittings and accessories for water and sewage applications.
NACE MR0175 / ISO 15156 compliance for sour service, and BS, DIN or JIS dimensional systems, are handled per the project specification with matching certification.
- Oil & gas — line pipe fittings for transmission and gathering systems.
- Petrochemical & refinery — large diameter elbows, tees and manifolds in alloy and stainless grades.
- Offshore — duplex and super duplex fittings with full traceability and third-party release.
- Power — high pressure fittings for main steam, feedwater and cooling water lines.
- Water transmission — fabricated steel fittings for large bore water mains.
- Material certificates to EN 10204 3.1 or 3.2, heat-number traceable to the fitting.
- Non-destructive testing coverage by radiographic, ultrasonic, magnetic particle, penetrant and eddy current methods.
- In-house laboratory testing — tensile, yield, low temperature impact, metallography and spectrometer analysis.
- Welding procedure specifications and procedure qualification records with qualified welders.
- Third-party inspection release by recognised inspection bodies where the owner appoints them.
- Full size and schedule coverage from one qualified mill, with heat-number traceability preserved.
- Custom angles, machining, beveling and coating applied to the project specification.
- Export packing with end protection, FOB / CFR / CIF to Gulf ports/global ports, consolidated with valves and pumps.
Supply references include Shell, ADNOC, SAIPEM and CNOOC, together with municipal water programmes in Dubai, Kenya, Tanzania and Singapore. Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.
Pipe Fittings & Flanges — Buyer Questions
What sizes and wall thicknesses are available?
Fittings from 1/2" to 104", wall thickness SCH 5S to XXS, plus ductile iron ranges DN 80–2600 at PN10, PN16 and PN25. Custom angles and machining are handled per project. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.
Which materials can be supplied?
Carbon steel to ASTM A234 WPB and A105, alloy steel, austenitic stainless to A403 WP304 / WP316 / WP316L, and duplex or super duplex grades. NACE MR0175 / ISO 15156 compliance is available for sour service. Also specified and procured as Butt Weld Fittings, Pipe Flanges and Elbow; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.
What coatings and linings are used?
Cement mortar lining in silicate, sulphate-resisting and high alumina grades, rich zinc with bitumen, fusion-bonded epoxy, polyurethane and zinc metal spray, applied to the specified thickness with holiday testing on buried and submerged service. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.
What certification comes with the fittings?
EN 10204 3.1 or 3.2 material certificates with heat-number traceability, dimensional and NDT records, PED 2014/68/EU documentation where applicable, coating reports, and a third-party inspection release when the owner appoints BV, SGS, Intertek or TÜV. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.



