Pump
DivisionDivision 43 Process Gas and Liquid Handling, Purification, and Storage Equipment
Section43 20 00 Liquid Handling Equipment
ApplicationsWater & Wastewater Infrastructure, Industrial & Energy Facilities
PRODUCT

Industrial Pumps & Pump Systems

Cooling water · Desalination · Drainage · Municipal — to ISO 9906, API 610 and HI

Water & Power Infrastructure ISO 9906 API 610
Overview

Vertical line shaft, high-pressure and large-volume pumps for cooling water, seawater intake, desalination, municipal drainage and industrial water service. Supplied with drivers, couplings, transmission components and matched accessories as a complete duty set, with performance verified by test before shipment and material selection matched to the conveyed fluid.

Specification

Manufactured range covers high pressure pumps with flows from 10 to 12,000 m³/h and heads up to 5,000 m at fluid temperatures to 450 °C, and large capacity pumps with flows from 80 to 270,000 m³/h at heads to 300 m and temperatures to 120 °C. Welded construction covers carbon steel, duplex and super duplex materials up to 3,000 mm discharge diameter.

Selection is based on duty point, available NPSH and solids content. Hydraulic development is supported by suction channel, NPSH and physical model testing, with shaft system stability and rotor critical speed analysis. Vertical line shaft, submersible, horizontal split case and axial flow configurations are supplied to the sump geometry. Reference duties include seawater intake, power plant circulating and cooling water, municipal water supply, drainage and petrochemical process service.

Standards
  • ISO 9906 — rotodynamic pumps — hydraulic performance acceptance tests, grades 1 and 2.
  • API 610 — centrifugal pumps for petroleum, petrochemical and natural gas industries.
  • ASME B73.1 — horizontal end suction centrifugal pumps for chemical process.
  • HI 9.6 / ISO 5199 — pump acceptance and vibration criteria for industrial duty.
  • HI 40.6 / (EU) 547/2012 — pump efficiency rating and ecodesign minimum efficiency index (MEI) for water pumps.
  • EN ISO 12100 / EN 809 — safety of machinery and common safety requirements for liquid pumps and pump units.

Test tolerances, vibration limits and NPSH margins are stated to the grade required by the specification. Where the project cites JIS, ASME or an owner standard, the pump is tested and certified to that requirement.

Applications
  • Power generation — cooling water, circulating and high pressure duties in thermal, nuclear and combined cycle plants.
  • Desalination & seawater — intake and high pressure duties for MSF, MED and RO plants.
  • Municipal water & drainage — large vertical units for water supply, rainwater and sewage treatment.
  • Petrochemical — process and circulating pumps for refinery and petrochemical complexes.
  • Water transfer — large scale diversion and irrigation duties at high flow.
Certificates & documentation
  • Performance testing on a large pump test bench with 15,000 m³ basin, 3,000 mm maximum pump size and 120,000 m³/h maximum flow.
  • High pressure test bench capability to 12,000 kW drive, 39 MPa and 200 °C water temperature.
  • Certified performance curves, NPSHr data and mechanical running test records per pump.
  • Material certificates to EN 10204 3.1 for casing, shaft and impeller.
  • CE documentation for pumps supplied to European projects.
Supply capability
  • Pump, driver, coupling, baseplate and accessories supplied and tested as one duty set.
  • Sump and intake review, including submergence, vortex and NPSHa assessment.
  • Export packing, FOB / CFR / CIF to Gulf ports/global ports, with installation supervision and commissioning support available.
Approval

Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.

FREQUENT QUESTIONS

Industrial Pumps & Pump Systems — Buyer Questions

What pump types are covered?

Vertical line shaft pumps for drainage, sewage and dewatering, and high-pressure or large-size pumps for seawater, cooling water, water supply and industrial water duties, with drivers, couplings and matched accessories. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.

Which standards and certifications apply to testing?

Hydraulic performance to ISO 9906 Grades 1 and 2, vibration to ISO 10816, and API 610 where the project is in petroleum or petrochemical service. Test tolerances and NPSH margins are stated to the grade the specification requires. Also specified and procured as Vertical Line Shaft Pump, Cooling Water Pump and Seawater Pump; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.

Can pumps be supplied for seawater and desalination duty?

Yes. Materials are selected against chloride content, velocity and temperature — bronze, duplex and super duplex stainless steel are standard for seawater, with coatings and cathodic protection where specified. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.

What documentation is provided and delivery terms?

Certified performance curve to ISO 9906, mechanical running test and vibration report, EN 10204 3.1 material certificates, hydrostatic and NDT records, plus a third-party inspection release when the owner appoints SGS, Bureau Veritas, Intertek or TÜV. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.