Packaged Water & Wastewater Treatment Equipment
Containerised and skid-mounted treatment plants for decentralised rural wastewater, municipal sewage, industrial park effluent and desalination of seawater, brackish and high-salinity water. The process train pairs anti-fouling thermal PVDF ultrafiltration with two-stage reverse osmosis, operated under AI-based unattended control for remote sites.
The packaged range covers skid-mounted units from 50 to 500 m³/d and modular plants assembled from low-carbon core plates in the 10,000 to 100,000 m³/d band, expandable in phases. Biological treatment uses MBBR moving-bed biofilm or membrane separation with pre-treatment and tertiary polishing integrated in one frame; the compact layout needs about one third of the land area of a conventional works and no in-situ concrete pouring. Energy use is around 25% below conventional equipment and lifecycle O and M cost about 40% lower.
Containerised and skid-mounted reverse-osmosis trains desalinate seawater and brackish feed at freshwater recovery of at least 50% and specific energy of 2.8 kWh/m³, using high-efficiency energy recovery with automated supervision of operating parameters. Brackish and high-turbidity feeds are handled on the same modular skids. Treated effluent is normally specified at BOD 10 mg/L, COD 50 mg/L, TSS 10 mg/L, NH3-N 5 mg/L and TN 15 mg/L, verified by composite sampling to EN 12255, with potable contact components certified to NSF/ANSI 61.
- EN 12255 — Performance and sampling requirements for wastewater treatment plants and treatment process verification.
- EN 12566-3 — Requirements for packaged and site-assembled domestic wastewater treatment units up to 50 population equivalent.
- ISO 30500 — General safety and performance requirements for prefabricated integrated treatment units tested at factory level.
- NSF/ANSI 61 — Health-effects evaluation of materials and components in contact with potable and reclaimed water.
- ASTM D4516 — Standard practice for standardising reverse-osmosis performance data for seawater and brackish feed.
- AWWA C653 — Disinfection of water treatment plants, governing commissioning and start-up hygiene of new installations.
Treated water quality is stated against the permit limits for the discharge or reuse application, and membrane performance is reported per the element manufacturer’s test conditions.
- Municipal & Public Works — township sewage treatment plants of 1,500 to 100,000 m³/d.
- Water & Wastewater — decentralised village and rural sewage treatment stations.
- Industrial & Manufacturing — industrial park effluent treatment and pre-discharge polishing.
- Oil & Gas — produced water and brackish well water desalination skids.
- Marine & Coastal — island and coastal resort potable water supply plants.
- Hospitality & Retail — hotel greywater recycling and landscape irrigation reuse.
- Healthcare & Education — temporary camp and emergency medical facility sewage units.
- Buildings & Construction — district cooling make-up water and irrigation reuse schemes.
- ISO 9001 quality management system certificate
- ISO 14001 environmental management system certificate
- ISO 45001 occupational health and safety certificate
- Material and pressure boundary certificates traceable to EN 10204 type 3.1
- Third-party laboratory effluent and performance test reports
- Operation and maintenance manuals, method statements and safety data sheets
- Containerised or skid-mounted delivery with rapid installation and minimal civil work.
- AI-based unattended operation, with remote monitoring and alarm reporting.
- Export packing, FOB / CFR / CIF to Gulf ports/global ports, with commissioning and operator training.
Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.
Packaged Water & Wastewater Treatment Equipment — Buyer Questions
What performance is achieved?
Reported performance is a freshwater recovery rate of 50 per cent or better at energy consumption of 2.8 kWh/m³, using anti-fouling thermal PVDF ultrafiltration with rejection above 99.99 per cent ahead of two-stage reverse osmosis. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.
How are the plants delivered?
Containerised or skid-mounted for rapid installation, configured for high-salinity and high-turbidity feed, and operated under AI-based unattended control for remote sites. Also specified and procured as Packaged Treatment Plant, Containerised Treatment Plant and Sewage Treatment Package; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.
Which applications are covered?
Decentralised rural wastewater, municipal sewage, industrial park effluent, and desalination of seawater, brackish and high-salinity water, plus treated effluent reuse for irrigation and industrial make-up. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.
Which standards and certifications apply?
Package plants are supplied against EN 12566-3 for systems up to 50 PT, ISO 30500 for non-sewered sanitation, EN 12255 for wastewater treatment plants and ISO 16075 for treated wastewater reuse. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.



