Water Intake Screening Equipment
Screening equipment for water intakes in power generation, desalination, seawater, municipal and industrial duties — travelling continuous band screens, drum screens, trash rakes and debris filters, together with stoplogs, stopgates and penstocks for intake isolation. Each machine is designed to the project hydraulic conditions, with 3D modelling, flow simulation and stress analysis before fabrication.
Manufactured ranges cover vertical bar screens with 6 to 40 mm spacing in channels 400 to 3,000 mm wide, step screens with 3 or 6 mm lamella spacing installed at 55°, rotating drum screens with 0.25 to 6 mm wedge-wire or 1 to 6 mm perforated baskets, and shaftless screw screens with 2 to 10 mm perforated or 0.25 to 3 mm wedge-wire baskets. Frames, lamellas, chains and combs are AISI 304 or AISI 316 stainless steel. Engineering ranges extend to channel widths up to 10 m, heads up to 20 m water column and flow rates up to 120,000 m³/h.
Selection is driven by aperture, channel width and peak flow. Travelling band screens are supplied in dual-flow, central-flow and thru-flow patterns with mesh from 0.5 to 10 mm at flows up to 70,000 m³/h; drum screens handle up to 120,000 m³/h at 1 to 10 mm. Design is supported by 3D modelling, flow simulation and stress analysis, and each unit is custom-fabricated for its channel and flow duty. Screenings are discharged at 2,300 to 3,000 mm into compactors or containers.
- ASTM A240 / EN 10088 — stainless steel plate, sheet and strip for wetted screen components.
- EN 1090-1 — execution of steel structures for supporting frames and walkways.
- EN 60204-1 / IEC 60204-1 — safety of machinery — electrical equipment of machines.
- ISO 12100 — safety of machinery — general principles for design and risk assessment.
- AWWA / EPA 316(b) guidance — intake screening requirements for fish protection where the authority requires it.
Material selection, coating system and drive specification follow the water quality, debris load and the environmental permit conditions for the intake.
- Municipal wastewater inlet works — coarse and fine screening at treatment plant headworks and pumping stations.
- Power plant cooling water — condenser protection and debris removal on once-through cooling intakes.
- Seawater desalination — pre-treatment screening for RO, MSF and MED plants.
- Oil, gas & chemical plants — intake screening for refineries, LNG terminals and process water.
- Water abstraction — screening at river, canal and reservoir offtakes.
- Material certificates to EN 10204 3.1 for frames, lamellas and screen baskets.
- Welding procedure specifications and welder qualification records for stainless fabrication.
- Factory acceptance test records for the drive unit and rake mechanism.
- Flow simulation and stress analysis documentation submitted with the design package.
- Delivery scope covers installation, start-up, site assistance, spare parts and maintenance contracts.
- Design, custom fabrication, delivery, installation and start-up as one scope.
- Maintenance contracts, technical site inspection and spare parts supply.
- Export packing, FOB / CFR / CIF to Gulf ports/global ports, consolidated with penstocks and trash racks.
Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.
Water Intake Screening Equipment — Buyer Questions
What screening capacity can be supplied?
Widths up to 10 m, head up to 20 m water column and flow rates up to 120,000 m³/h, with mesh apertures from 0.5 to 10 mm selected against the debris spectrum and the environmental screening requirement. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.
What equipment types are covered?
Travelling continuous band screens, drum screens, trash rakes and debris filters, together with stoplogs, stopgates and penstocks for intake isolation. Also specified and procured as Band Screen, Drum Screen and Trash Rake; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.
Is the equipment standard or project-specific — including custom and OEM supply?
Project-specific. Each machine is designed to the project hydraulic conditions using 3D modelling, flow simulation and stress analysis before custom fabrication. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.
What is included in the delivery scope?
Design, custom fabrication, delivery, installation and start-up, plus maintenance contracts, site assistance and repair, technical site inspection and spare parts. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.



