Trash Rack
DivisionDivision 35 Waterway and Marine Construction
Section35 20 00 Waterway and Marine Construction and Equipment
ApplicationsIndustrial & Energy Facilities, Water & Wastewater Infrastructure
PRODUCT

Trash Racks & Intake Debris Screens

Coarse and fine screening for power, desalination and municipal intakes

Water & Power Intake Custom Fabricated 0.5–10 mm Aperture
Overview

Trash racks and intake debris screens for power stations, desalination plants, seawater intakes, municipal water treatment, industrial water and oil and gas facilities. Self-cleaning trash rakes handle coarse debris; travelling band screens, drum screens and debris filters handle fine screening, with stoplogs, stopgates and penstocks for intake isolation.

Specification

Manual bar screens are built as a stainless steel frame fixed to the channel wall with a central bar screen area, normally installed at 75°, and are cleaned by a hand rake that moves retained material to a discharge chute; no mechanical component is immersed in the flow. Mechanised trash rakes are supplied in widths from 1 m to 6 m and bar spacing from 5 mm to 50 mm, in AISI 304 or AISI 316 with carbon steel optional. Engineering ranges extend to channel widths up to 10 m, heads up to 20 m water column and flow rates up to 120,000 m³/h.

Arc screens use plasma-cut bars on a press-formed or tubular frame, rotating comb arms in stainless steel or self-lubricating polyzene, and a scraping blade for automatic comb cleaning, with channel widths of 300 to 3,000 mm, heights of 800 to 1,800 mm and installed power of 0.18 to 4.00 kW. Basket screens run on wall anchors or floor-fixed sliding tubes and are lifted manually or by electric winch. Overload protection is by dynamometric device or electronic current limiter.

Standards
  • ASTM A240 / EN 10088 — stainless steel plate, sheet and strip for bars, frames and rakes.
  • EN 1090-1 — execution of steel structures for rack frames and support steel.
  • EN 60204-1 / IEC 60204-1 — safety of machinery — electrical equipment of rake drives.
  • ISO 12100 — safety of machinery — general principles for design and risk assessment.
  • ISO 12944 — protective paint systems for carbon steel components in immersed service.

Bar spacing, aperture and material are set against the debris spectrum, the approach velocity and the environmental permit conditions for the intake.

Applications
  • Hydroelectric & power plant intakes — coarse trash racks ahead of turbines and cooling water pumps.
  • Water abstraction & pumping stations — bar screens protecting pumps and downstream equipment.
  • Desalination & seawater intakes — marine intake screening subject to fish-protection requirements.
  • Storm drains & culverts — manual bar screens on small civil drainage channels.
  • Sewage & wastewater — coarse screening ahead of inlet works and channels.
Certificates & documentation
  • Material certificates to EN 10204 3.1 for bars, frames and comb assemblies.
  • Overload protection by dynamometric device or electronic current limiter on rake and screen drives.
  • Custom-built fabrication with 3D modelling, flow simulation and stress analysis for each intake geometry.
  • Scope covers delivery, installation, start-up, spare parts, site assistance and maintenance contracts.
Supply capability
  • Design, custom fabrication, delivery, installation and start-up as one scope.
  • Maintenance contracts, site assistance, repair and spare parts supply.
  • Export packing, FOB / CFR / CIF to Gulf ports/global ports, consolidated with penstocks and screens.
Approval

Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.

FREQUENT QUESTIONS

Trash Racks & Intake Debris Screens — Buyer Questions

What capacity can be supplied?

Widths up to 10 m, head up to 20 m water column and flow rates up to 120,000 m³/h, with mesh apertures from 0.5 to 10 mm. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.

What types are covered?

Self-cleaning trash rakes for coarse debris, travelling band screens, drum screens and debris filters for fine screening, and stoplogs, stopgates and penstocks for intake isolation. Also specified and procured as Trash Rake, Intake Screen and Bar Screen; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.

Which industries are served?

Power generation, desalination, seawater intakes, municipal water and sewage treatment, industrial water, and oil, gas and LNG water systems. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.

Is the equipment designed per project?

Yes. Each unit is designed to the project hydraulic conditions using 3D modelling, flow simulation and stress analysis, then custom fabricated. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.