Penstock
DivisionDivision 35 Waterway and Marine Construction
Section35 20 00 Waterway and Marine Construction and Equipment
ApplicationsWater & Wastewater Infrastructure, Industrial & Energy Facilities
PRODUCT

Penstocks & Water Control Gates

Intake · Flood control · Outfall — 3D modelled, flow simulated, custom fabricated

Water & Marine Works Custom Engineered Hydraulic Design
Overview

Penstocks and water control gates for waterworks intakes, flood and storm water drainage, power-plant water-side systems, and intakes and outfalls in LNG and chemical plants. Each gate is engineered to the project hydraulic conditions and layout rather than selected from a standard range, with 3D modelling, flow simulation and structural stress analysis before fabrication.

Specification

The sliding frame and the reinforced shield are fabricated from AISI 304 or AISI 316 stainless steel profiles and plate, with thrust wedges between frame and shield. A rising stainless steel stem is hinged on the shield and driven through a bronze nut carried on an epoxy-coated carbon steel handwheel; sealing is by a high-strength rubber gasket. Gates are supplied sealing on three or four sides, and in a weir or overflow version.

Standard square openings run from 400×400 mm to 2,000×2,000 mm and round openings from DN 400 to DN 2,000, with the operating floor height defined by the structure. Product coverage includes stoplogs, stopgates, penstocks and debris filters integrated with the intake system. Engineering ranges extend to channel widths up to 10 m, heads up to 20 m water column and flow rates up to 120,000 m³/h. Electric actuators with travel-limit feedback and local controls are available, and seats are lapped and matched for drop-tight shut-off.

Standards
  • ASTM A240 / EN 10088 — stainless steel plate, sheet and strip for frames and shields.
  • EN 1090-1 — execution of steel structures for penstock frames and support steel.
  • EN 12266-1 & -2 — pressure testing, test procedures and acceptance criteria adapted to gate leakage.
  • AWWA C561 — fabricated stainless steel slide gates, where the project cites the AWWA method.
  • EN ISO 12100 — safety of machinery — general principles for design and risk assessment.

Material, sealing arrangement and coating system follow the water quality, the head and the maintenance access philosophy for the installation.

Applications
  • Channels & storage tanks — isolation and cut-off duty on open channels and tanks.
  • Wastewater treatment plants — flow isolation in inlet works, tanks and outlet structures.
  • Water intake & pumping stations — intake isolation ahead of screens and pumps.
  • Submerged openings & pipelines — closing of underwater openings and pipe ends.
  • Desalination & cooling water — isolation duties on seawater intake and outfall structures.
Certificates & documentation
  • Performance witnessed at full open and close differential pressure rating before shipment.
  • Seats are lapped and matched and verified drop-tight, with bronze channel guides for low-torque seating.
  • Electric actuators are mounted and function-tested together with the gate at the factory before dispatch.
  • Material certificates to EN 10204 3.1 for frame, shield and stem.
  • Per shipment: certificate of conformity, packing list, MTC and installation drawings.
Supply capability
  • Custom design and simulation — 3D modelling, flow simulation, stress and structural analysis.
  • Non-standard fabrication and system integration to the project hydraulic layout.
  • Export packing, FOB / CFR / CIF to Gulf ports/global ports, consolidated with screens and trash racks.
Approval

Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.

FREQUENT QUESTIONS

Penstocks & Water Control Gates — Buyer Questions

What duties are covered?

Waterworks intakes, flood and storm water drainage, power-plant water-side systems, and intakes and outfalls in LNG and chemical plants, along with desalination and irrigation control. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.

Are penstocks standard products?

No. Each gate is engineered to the project hydraulic conditions and layout, with 3D modelling, flow simulation and structural stress analysis, then custom fabricated and integrated with the structure. Also specified and procured as Slide Gate, Sluice Gate and Flap Valve; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.

Which standards and certifications apply?

Structural steelwork is CE marked to EN 1090-1 and designed to EN 1993-1-1 or AISC 360, with stainless components to ASTM A240 or EN 10088, coating to ISO 12944, and AWWA C561 or C562 where the project cites them. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.

Is leakage testing carried out?

Yes. Factory acceptance testing includes seating and leakage testing where the specification requires it, with records provided in the O&M documentation. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.