Stainless Steel Rebar
Stainless steel reinforcing bar for concrete in coastal, marine, bridge, tunnel, port and hydraulic structures where chloride-induced corrosion would govern the maintenance cycle. Supplied in austenitic and duplex grades, with cutting, bending, threading and matching stainless couplers, so the whole reinforcement package carries one corrosion class.
Stainless reinforcing bar is supplied to ASTM A955/A955M-20 and BS 6744-2023, with CAN/CSA G30.18:21 sizes offered for North American projects. The duplex 2304 grade, EN 1.4362 / UNS S32304, is stocked in diameters from 8 mm to 50 mm at unit masses of 0.392 kg/m to 15.297 kg/m, in 12 m stock lengths or cut-to-length bars. Austenitic 316L, EN 1.4436 / UNS S31603, and duplex 2205, EN 1.4462 / UNS S32205, are available where chloride exposure is most severe.
Bars are cut, bent and threaded in-house to BS 8666 shape codes, with straight lengths up to 15 m, cutting tolerance of +25 mm and bending tolerances of plus or minus 5 mm to +5 / -25 mm. Matching duplex stainless couplers cover bar sizes 20 mm to 50 mm with 31 mm to 78 mm outside diameter. Welded mesh fabric is produced to BS 6744:2016 in BS 4483:2005 fabric sizes, and 1x7 strand to ASTM A1114/A1114M-20 is offered at 15.2 mm and 15.7 mm with 1860 MPa tensile strength.
- ASTM A955/A955M — Standard specification for deformed and plain stainless steel bars used for concrete reinforcement.
- BS 6744 — British standard for stainless steel bars for the reinforcement of and use in concrete, current edition 2023.
- CAN/CSA G30.18 — North American standard for stainless steel bars used as concrete reinforcement, expressed in 10M to 55M sizes.
- BS 8666 — British standard for scheduling, dimensioning, bending and cutting of steel reinforcement.
- ASTM A1114/A1114M — Standard specification for stainless steel prestressing strand, including 1860 MPa 1x7 constructions.
- BS 4483 — British standard for steel fabric sizes used for the reinforcement of concrete, applied to stainless mesh.
Grade selection follows the chloride exposure class. Where the project cites an owner material specification or a national annex, the bar is sourced and certified to that requirement.
- Bridges & Coastal Structures — bridge deck and splash-zone reinforcement.
- Ports & Marine — quay walls, jetties and berth structures.
- Tunnels & Underground — immersed and bored tunnel lining reinforcement.
- Water & Wastewater — desalination and treatment plant liquid-retaining structures.
- Transport Infrastructure — airport aprons and highway structures exposed to de-icing salts.
- Oil & Gas — lng containment and coastal terminal structures.
- Power & Energy — nuclear and thermal power plant marine intake structures.
- Buildings & Infrastructure — permanent formwork and architectural concrete in aggressive soils.
- Independent third-party reinforcing steel product approval certificate
- EN 10204 3.1 or 3.2 inspection certificate with cast analysis and mechanical test results
- ISO 9001 quality management system certificate
- ISO 14001 environmental management system certificate
- ISO 45001 occupational health and safety management system certificate
- Third-party mechanical, bending and chloride corrosion test report
- Cutting, bending, threading and matching stainless couplers from one qualified mill.
- Grade selection support against the specified chloride exposure class and design life.
- Export packing with separation from carbon steel, FOB / CFR / CIF to Gulf ports.
Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.
Stainless Steel Rebar — Buyer Questions
What grades and sizes are available?
Diameters from 8 mm to 40 mm in standard 12 m lengths, with custom lengths available. Grades include EN 1.4301, 1.4436, 1.4362 and 1.4462, and UNS S31603, S32304 and S32205. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.
Which standards and certifications apply?
Bars are supplied to BS 6744 and ASTM A955 / A955M, with stainless steel delivery conditions to EN 10088 and CARES certification as a stainless rebar producer. Also specified and procured as Stainless Rebar, Stainless Steel Reinforcement and Duplex Rebar; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.
When is stainless rebar worth specifying?
Where chloride exposure would drive repeated repair — coastal and marine works, bridge decks, ports, tunnels and hydraulic structures — and on assets with a specified service life of 100 years or more, where the whole-life cost offsets the higher initial material cost. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.
Can couplers and bent bars be supplied?
Yes. Cutting, bending, threading and matching stainless steel couplers are supplied, so that splices and mechanical connections carry the same corrosion class as the bar. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.



