Dowel Bars & Tie Rods
Dowel bars and tie rods for load transfer across joints in concrete pavements, slabs and runway bays — airport pavements, heavy-truck roads, bridge decks and industrial floors. Supplied in epoxy-coated, galvanized and stainless steel, in one package, so that joint performance is not limited by corrosion of the load transfer device.
Dowel bars are supplied in two executions: fusion-bonded epoxy-coated carbon steel to ASTM A1078/A1078M with coating applied and tested to ASTM A775/A775M and ASTM A934/A934M, and solid duplex stainless to EN 1.4362 / UNS S32304. Carbon grades are BS 4449 Grade 250 and ASTM A615/A615M Grades 40, 60 and 75; stainless grades are 250 and 500. Diameters run from 16 mm to 50 mm for coated bar and 16 mm to 60 mm for stainless, with unit mass from 1.57 kg/m to 22.03 kg/m, cut to the joint detail.
Bars are cut to length with deburred square ends and supplied with movement caps, bond-breaking sleeves and corrosion-resistant basket assemblies so that load transfer across the joint is maintained without restraining longitudinal slab movement. Epoxy coating is verified for thickness, holiday continuity and adhesion under BS ISO 14654. Published service-life studies for the coated system indicate 65 years against 21 years for uncoated bar, with a monitored bridge deck reaching 80 years. Galvanized and stainless executions suit marine splash zones.
- ASTM A1078/A1078M — Specification for epoxy-coated steel dowel bars used for load transfer across concrete pavement joints.
- ASTM A775/A775M — Specification for fusion-bonded epoxy coating applied to steel bar, including thickness and holiday limits.
- ASTM A934/A934M — Specification for epoxy-coated prefabricated steel reinforcing and dowel bar assemblies.
- ASTM A615/A615M — Standard specification for deformed and plain carbon-steel bar in Grades 40, 60 and 75.
- BS 4449 — British standard for steel bar for the reinforcement of concrete, including Grade 250 and 460B / B500B.
- BS ISO 14654 — International specification for epoxy coating of steel reinforcement and dowel bar for concrete.
Coating thickness, holiday count and bend flexibility are tested per lot. Where the project cites an owner pavement specification, the bar is certified to that requirement.
- Transport Infrastructure — airport runway and taxiway pavement joints; highway and expressway concrete slab joints.
- Bridges & Structures — bridge deck construction and expansion joints.
- Ports & Marine — quay wall and coastal defence slab joints.
- Oil & Gas — lng terminal jetty and tank farm pavements.
- Power & Energy — nuclear and thermal power plant heavy-duty slabs.
- Rail & Metro — station platform and depot floor slab joints.
- Industrial Facilities — warehouse and container yard heavy-duty floors.
- EN 10204 3.1 mill test certificate with cast and heat analysis
- ISO 9001 quality management system certificate
- ISO 14001 environmental management system certificate
- Third-party epoxy coating inspection report covering thickness, holiday and adhesion
- Independent laboratory corrosion and chloride resistance test report
- Certificate of origin and packing list for customs clearance
- Epoxy-coated, galvanized and stainless bars supplied together from one source.
- Cutting, end preparation and matching accessories — debonding caps, sleeves, baskets and chairs.
- Export packing with coating protection, FOB / CFR / CIF to Gulf ports.
Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.
Dowel Bars & Tie Rods — Buyer Questions
What sizes and coatings are available?
Diameter 16 to 40 mm and length 100 to 1000 mm, with custom dimensions available, in BS Grade 250 and ASTM Grade 40/60 steel. Coatings are fusion-bonded epoxy, hot-dip galvanizing, or solid stainless steel. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.
Which standards and certifications apply?
Bars are supplied to ASTM A1078 / A1078M, with epoxy coating to ASTM A775 / A775M, BS 7295 and ISO 14654, and base steel to BS 4449 or ASTM A615. Also specified and procured as Epoxy Coated Dowel Bar; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.
Where are dowel bars used?
Across joints in concrete pavements and slabs where shear has to be transferred while longitudinal movement continues — airport pavements, heavy-truck roads, port container yards, highways, bridge approach slabs and industrial floors. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.
What coating testing is carried out?
Coating thickness, holiday count and cathodic disbondment are tested per lot to ASTM A775 or BS 7295, with dimensional and straightness records provided with the shipment. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.



