PVC Waterstops
PVC waterstops for sealing construction, expansion and movement joints in water-retaining and water-excluding concrete — reservoirs, tanks, basements, tunnels, culverts, desalination plants, pools, dams and canals. Multiple ribs form a tortuous path against water migration, and the extrusion-grade PVC is heat-fused on site for continuous joint welds.
Manufactured from extrusion-grade PVC resin with selected additives, phthalate free and suitable for potable water contact. Physical properties: specific gravity 1.34±0.02, tensile strength 15 N/mm², ultimate elongation 370%, tear strength above 50 kN/m, stiffness in flexure above 4 kN/mm², Shore A hardness 80±5, water absorption below 0.2% in 24 h and no brittle failure at -37 °C. Chemical resistance spans pH 2.5 to 11.5.
Profiles are offered as internal and external types for construction and expansion joints, with central bulbs and multiple ribs forming a tortuous water path; standard rolls are 150 to 350 mm wide, 4 mm or 10 mm thick and 15 m long. Brass eyelets along the flanges allow wiring to reinforcement. Site joints are butt-spliced with a thermostatically controlled 240 V welding knife above 140 °C, and corners use factory-welded junctions.
- BS 2782 — test methods for the PVC compound covering tensile strength, elongation and softness number.
- CRD-C 572-74 — accelerated extraction and alkali resistance testing of the waterstop compound.
- ASTM D638 / D792 / D570 — tensile properties, specific gravity and water absorption.
- ASTM D624 / D747 / D746 — tear strength, stiffness in flexure and low temperature brittleness.
- ASTM D2240 / D543 / D1203 — Shore A hardness, chemical resistance and volatile loss.
- BS EN 12390 / BS 6920 — resistance to hydrostatic pressure at 7 bar; suitability for potable water contact.
Performance is evaluated against the listed methods and is subject to project specifications and test reports. Potable water contact is assessed to BS 6920 where applicable.
- Water containment structures — reservoirs, storage tanks, dams and canals.
- Basements & retaining walls — construction and contraction joints in below-ground structures.
- Tunnels & underpasses — joint sealing in box culverts, manholes and underpasses.
- Desalination & sewage tanks — joints in aggressive and potable water service.
- Swimming pools — watertight jointing of pool shells and balance tanks.
- Type test reports for tensile strength and elongation, tear strength, Shore A hardness, water absorption and specific gravity.
- Third-party reporting covers tensile and elongation after accelerated extraction to CRD-C 572.
- Chemical resistance verified to ASTM D 543 over the pH range 2.5 to 11.5.
- Effect on alkali assessed over 7 days: weight change +0.25% / -0.10% maximum, hardness change 5% maximum.
- Standard profiles from stock, with factory-fabricated L, T and X junctions to the joint layout.
- Heat-welding guidance and site training for continuous joints.
- Export packing, FOB / CFR / CIF to Gulf ports/global ports, consolidated with waterproofing membranes and sealants.
Supply references include TAQA Transmission, TAQA Distribution, TAQA Water and SWS, Ramhan Island, ALDAR Properties, ALDAR Projects, DEWA, Shuweihat IV RO and ADDC/TAQA. Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.
PVC Waterstops — Buyer Questions
What sizes and profiles are available?
Standard widths 150, 200, 250 and 350 mm in 15 m rolls at 4 mm thickness, plus 250 mm at 10 mm for higher hydrostatic duty. Internal profiles sit within the concrete section and external profiles are fixed to the face. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.
Are junctions supplied pre-fabricated?
Yes. Factory-fabricated L, T and X junctions are supplied so that direction changes are moulded rather than site-welded, and the profile is heat-fusible for continuous joints on site. Also specified and procured as Water Bar and Construction Joint Waterstop; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.
Which standards and certifications apply?
The profile is designed with reference to BS 2782 and performance is evaluated to BS 2571, CRD-C572-74 and ASTM methods for tensile properties, tear resistance, hardness and chemical resistance, subject to project specifications and test reports. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.
Can waterstops be used in potable water structures?
Yes. Suitability for contact with potable water is assessed to BS 6920 where the structure carries drinking water. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.



