Prestressing Steel Strand & Anchorages
Seven-wire prestressing strand and matching anchorages for prestressed concrete bridges, box girders, viaducts, long-span beams and transfer structures. Strand carries the prestressing force; anchorages lock and transfer it into the concrete, allowing longer spans and controlled deflection. Supplied with ducts and corrosion protection as a complete post-tensioning package.
Strand is supplied in common seven-wire sizes of 9.53, 12.70 and 15.20 to 15.24 mm in 1725 and 1860 MPa grades, to the standard cited by the project. Multi-strand anchorages comprise an anchor head, bearing plate and spiral reinforcement, with anchor head diameters from 91 mm for a 3-strand tendon to 290 mm for a 37-strand tendon encased in corrugated plastic duct. Flat anchorages cover 2 to 5 strands.
Tendons are detailed as bonded, encapsulated, electrically isolated, inspectable or coupler-connected systems, with dead-end loops where the far end is inaccessible. Ducts are corrugated plastic with sealed mechanical couplers, 50 to 115 mm internal diameter in round profile plus a flat profile. Full prestressing force may be applied once the concrete reaches the specified transfer strength, with temporary overstressing to 80% of guaranteed ultimate tensile strength.
- ASTM A416 / A416M — steel strand, uncoated seven-wire for prestressed concrete.
- BS 5896 / JIS G 3536 — British and Japanese specifications for prestressing steel strand.
- EN 10138-3 / ISO 6934-4 — prestressing steel strand — European and international material specifications.
- BS EN 13391:2004 — mechanical tests for post-tensioning systems — anchorage spacing and load transfer.
- ETAG 013 (2002) — European technical approval guideline for post-tensioning kits.
- AASHTO LRFD / FIP (1992) — bridge construction specifications and acceptance recommendations for post-tensioning systems.
Applicable editions and compliance are subject to project requirements and supporting test documents. Certification also references AS/NZS 4672 and KS D 7002.
- Road & railway bridges — bonded multi-strand tendons for beams, girders and decks.
- Transfer girders & long spans — increased span and load capacity with reduced deflection.
- Building & podium slabs — post-tensioned flat slabs and transfer structures.
- Corrosive environments — encapsulated and electrically isolated tendons for durability monitoring.
- Water & containment structures — circumferential and vertical prestressing of tanks and silos.
- Mill certificates to EN 10204 3.1 per coil, with tensile, yield and relaxation data.
- Anchorage load transfer and static and fatigue test reports to the cited post-tensioning standard.
- Duct and coupler test records for leak tightness and profile retention.
- Stressing equipment calibration certificates, with jacks rated to 10,000 kN.
- Per shipment: certificate of conformity, packing list, MTC and tendon installation drawings.
- Strand, anchorages, ducts and corrosion protection supplied and tested as one system.
- Stressing calculations, elongation tables and installation method statements.
- Export packing with moisture protection, FOB / CFR / CIF to Gulf ports/global ports, with site stressing support available.
Strand carries DM–DCL product conformity certification, which is separate from project approval. Anchorage supply references include RA210 in Kuwait, ECRL in Malaysia, E-763 in Serbia and the J.P. Magufuli Bridge in Tanzania; supply references do not establish owner approval, and formal acceptance requires product-specific owner or consultant approval. Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.
Prestressing Steel Strand & Anchorages — Buyer Questions
What strand sizes and grades are available?
Common seven-wire sizes 9.53, 12.70 and 15.20–15.24 mm in grades 1725 and 1860 MPa. Low-relaxation strand is supplied as standard unless the specification states otherwise. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.
Which standards and certifications apply to strand and anchorages?
Strand is supplied to ASTM A416 / A416M, BS 5896, EN 10138-3 or JIS G 3536. Anchorages are tested to BS EN 13391 and ETAG 013, with AASHTO LRFD and FIP recommendations referenced. Also specified and procured as Prestressing Strand, PC Strand and Post Tensioning; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.
What anchorage configurations are covered?
3 to 37-strand configurations for 15.24 mm strand and 2 to 5-strand flat anchorages, with simultaneous multi-strand stressing and duct-based corrosion protection. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.
Is prior supply to a project the same as owner approval?
No. Supply references record that material was delivered, not that it was approved. Formal acceptance requires a product-specific approval from the owner or consultant, and PROTEKTA prepares the submittal package for that approval. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.



