Overhead & Gantry Cranes
Overhead cranes, gantry cranes and electric hoists for industrial lifting in manufacturing and process environments, supplied as complete lifting systems with integrated hoists. Capacity coverage runs from 0.5 t for light duty to 900 t for heavy duty, with light-duty ranges from 1 to 20 t and heavy-duty ranges from 5 to 600 t.
Manufactured range covers electric wire rope hoists from 0.5 t to 50 t, single-girder overhead cranes from 1 t to 32 t, double-girder overhead cranes from 5 t to 500 t, and gantry cranes from 5 t to 900 t. Standard overhead units are built to duty classifications A3 to A5, with hoist mechanisms classified M3 to M5. Wide-span gantry configurations reach 300 t at 112 m span with 63 m lifting height for shipyard service.
Selection is driven by span, lifting height and duty cycle. Single-girder machines suit workshops, pump halls and maintenance bays. Double-girder machines serve power plants, steel works and cement plants, where frequent duty calls for A5 classification. Variable frequency control is applied across travel, hoist and cross-traverse motions for smooth load handling. Explosion-proof, grab, magnetic and foundry configurations are engineered to the project duty.
- CMAA 70 / CMAA 74 — North American specifications for top-running and underhung electric overhead travelling cranes.
- ISO 4301-1 — cranes — classification by utilisation and load spectrum.
- EN 15011 — cranes — bridge and gantry cranes, covering dimensional and performance requirements.
- A3-A5 / M3-M5 — working classification of cranes and hoist mechanisms, used to match utilisation and duty cycle.
- FEM 1.001 — rules for the design of hoisting appliances, applied where the project cites the European method.
Duty classification follows FEM 1.001 or the specified ISO class, set by the utilisation and load spectrum rather than by capacity alone.
- Power generation — overhead cranes and hoists for combined cycle, oil shale and wind power projects.
- Steel and metals — double-girder cranes and casting cranes for billet, coil and melt shop handling.
- Cement and mining — hoists with extended lift heights for kilns, silos and raw material handling.
- Water and desalination — single and double girder cranes for pump halls and treatment buildings.
- Ports and shipyards — wide span gantry cranes with high lift heights for shipyard handling.
- Special equipment manufacture licence covering installation, alteration, repair and maintenance of cranes.
- Type test certificates issued by the national lifting and transportation machinery inspection centre for each crane class.
- Full-load testing on an in-house 500 t crane test platform before dispatch.
- In-house physical and chemical testing, non-destructive testing and metrology facilities for structural verification.
- Load test certificates, Mill test certificates for the main girders and welded connection NDT records per crane.
- Crane, hoist, controls and runway interface supplied and tested as one system.
- Duty classification support against the utilisation and load spectrum of the application.
- Export packing, FOB / CFR / CIF to Gulf ports/global ports, with installation and commissioning support.
Supplied to projects across the Gulf, North and Sub-Saharan Africa, South-East Asia and Australia. Middle East supplies are subject to project-specific approval by the owner, engineer or consultant; PROTEKTA prepares and supports the submittal package for that approval.
Overhead & Gantry Cranes — Buyer Questions
What capacity range is covered?
Capacity coverage from 0.5 t to 900 t, with light-duty ranges of 1–20 t and heavy-duty ranges of 5–600 t, as overhead cranes, gantry cranes and electric hoists. Supplied for projects across the GCC — Saudi Arabia, UAE, Qatar, Kuwait, Oman and Bahrain — and to Iraq, Algeria, Morocco, Nigeria, Ethiopia, Tanzania, Malaysia, Thailand, Singapore, Indonesia, Brunei and Australia, with compliance documentation prepared for consultant, contractor and authority submittal.
Which standards and certifications apply?
Cranes are designed to EN 13001-1 and -2 with EN 15011 for bridge and gantry cranes, and duty classification to FEM 1.001. ATEX 2014/34/EU documentation is provided where explosive atmospheres are present. Also specified and procured as Overhead Crane, EOT Crane and Electric Hoist; full specification ranges, material grades and datasheets are issued for tender, submittal and procurement use.
How is duty classification selected?
Duty classification follows FEM 1.001 or the specified ISO class, set by the utilisation and load spectrum of the application rather than by capacity alone. OEM, private-label and bespoke manufacture is supported for contractors, distributors and EPC packages.
Is load testing carried out?
Yes. Static and dynamic load tests are carried out to the specified proof load factor, with certificates provided alongside the CE declaration and structural design calculation. Export packing, third-party inspection and consolidated shipment to Gulf ports/global ports are arranged with the order.



